Brief data overview of MAS components
Housing type: for assembly on top hat rails
Potential isolation: galvanic isolation towards the MAS bus
Dimensions (W x H x D): 22.5 x 99 x 92 mm
Dimensions (W x H x D): 35 x 99 x 115 mm (MAS 1010)
IP degree of protection: IP20
Bus coupler
Ethernet MAS 1010 bus coupler
Maximum number of modules: 64
Protocols: Modbus TCP, STV TCP
Connectivity: VPN, Syslog
MAS 2015 digital input module
Number of inputs: 16 (24 V)
MAS 2020 digital metering module
Number of inputs: 4 (24 V)
Metering depth: 16 Bit
Metering frequency: max. 20 kHz
MAS 2065 digital output module
Number of outputs: 16 (24 V)
Output current: 0.5 A per output, max. 4 A in total
Load type: ohmic, inductive
Protection: protected against short circuits and excess temperature
MAS 2070 PWM module
Number of outputs: 4
Load type: ohmic, inductive
Resolution: 2 x 8 Bit, 2 x 12 Bit
PWM frequency: 20 Hz – 10 kHz
Protection: protected against short circuits and excess temperature
MAS 3010 analogue input module
Number of analogue inputs: 8
Signal voltage: 0 – 10 V
Resolution: 12 Bit
Sampling time: ~ 1 ms
Number of digital inputs: 2 (24 V)
Internal resistance: >100 kOhm
MAS 3020 analogue input module
Number of analogue inputs: 2
Signal current: 4 – 20 mA
Resolution: 12 Bit
Sampling time: ~ 1 ms
Number of digital inputs: 2 (24 V)
Internal resistance: 250 Ohm
Type K module 3040 thermal element
Number of inputs: 1
Connection technology: two conductors
Resolution: 12 Bit/0.25 °C per digit
Sampling time: ~ 250 ms
MAS 3060 analogue output module
Number of outputs: 4
Signal voltage: 0 – 10 V
Output current: at max. 5 mA per channel
Resolution: 12 Bit
Sampling time: ~ 1 ms
MAS 4010 motion control module Stepper motor – 24 V/1.5 A
Number of outputs: 1 stepper motor, 2 phases
Output current: at max. 1.5 A per phase
Current controller frequency: 20 kHz
Step pattern: full step, semi step, up to 64x micro stepping
Number of digital inputs: 2 (for limit switch(es))
MAS 4020 motion control modul 2 x stepper motor – 24 V/1.5 A
Number of outputs: 2 stepper motors, 2 phases
Output current: at max. 1.5 A per phase
Current controller frequency: 20 kHz
Step pattern: full step, semi step, up to 16x micro stepping
Number of digital inputs: 4 (for limit switch(es))
MAS 4030 motion control module Stepper motor – 48 V/5 A
Number of outputs: 1 stepper motor, 2 phases
Output current: at max. 5 A per phase
Current controller frequency: 25 kHz
Step pattern: full step, semi step, up to 16x micro stepping
Incremental inputs: 24 V DC, 2 pulse groups, 20 MHz, squaring cycle
Number of digital inputs: 2 (for limit switches)
093100 MAS 1010 24VDC Buskoppler Ethernet
093130 MAS 2015 Digitales Eingangsmodul 16 DI
093140 MAS 2020 Digitales Zählermodul
093170 MAS 2065 Digitales Ausgangsmodul 16 DO
093220 MAS 3010 Analoges Eingangsmodul 4-20 mA
093280 MAS 3060 Analoges Ausgangsmodul 0-10 V
093300 MAS 4010 2-Phasen-Motion-Control-Modul